JHM Technologies
Welcome to JHM Technologies Online Store
Welcome To JHM Technologies Online Store, if you have any questions feel free to call us!
Categories
Bestsellers
- 1. Mushroom VM/RTM Light Seal Green Silicone #3202FT (Sold by the Foot)
- 2. Mold Vacuum Wing Seal - EPDM #1680FT - (Sold by the Foot)
- 3. 3/8"OD LDPE Tube ( Per Foot )
- 4. White Silicone Seal 10mm x 5mm #0002 - (Sold by the Foot)
- 5. A.V.I.S. Spares Kit
- 6. 3/8" Instant fitting
- 7. 3/8 NPT Replacement Bushing (Grommit) for #2149-N Cord Grip Fitting
- 8. 3/8"-10MM Nylon Injection Pipe Insert
- 9. Red Resin Channel Profile #7329FT
- 10. [Block] Gap Filling Wax
- 11. 1/4" Push Lock Fitting
- 12. Mold Seals- Dynamic #1114RL - (Sold by the 100 foot Roll)
- 13. Mushroom VM/RTM Light Seal Green Silicone #3202RL (100 Foot Rolls)
- 14. Wing Seal Profile-Neoprene #3391RL (Sold only in 20 Foot Rolls)
- 15. Mold Vacuum Wing Seal - EPDM #1680RL - (Sold by the 100 Foot Roll)
- 16. Remote Resin Vacuum Catchpot
- 17. 1/4" Vacuum Plug Assembly
- 18. Universal Steel Vent #0123
- 19. AVIS (Automatic Vent Injection Sprue)
- 20. Direct Resin Vacuum Catchpot
- 21. Injection Insert Body
- 22. Dynamic Seal Installation Kit #2056
- 23. Direct Resin Catchpot w/View
- 24. High Temp Adhesive Backed Sheetwax - All Sizes Available
- 25. Autosprue C Mold Insert Adaptor w/O'Rings
- 26. Red Dynamic Seal Channel Profile #3340FT (Sold by the Foot)
- 27. 6mm Vacuum Plug Assembly
- 28. AVIS 3/8" Injection Port Insert w/Teflon Inner Sleeve
- 29. Spare Nylon 3/8" or 10mm Injection Fitting
- 30. 10mm Silver Fitting for #3317 10mm Vacuum Connection
- 31. Red Dynamic Seal Channel Profile #3340RL (Sold in 100 Foot Rolls)
- 32. Dynamic Seal Regulator
- 33. Mold Seals- Dynamic #1114FT - (Sold by the Foot)
- 34. Mixer Tube Standard
- 35. RTV Silicone sealant
- 36. Female Resin Quick Connector O'Ring
- 37. Catchpot Insert #0093
- 38. Red Resin Channel Profile #7329RL
- 39. 1/4"OD LDPE Tube-Clear ( Per Foot )
- 40. Resin Pump Outer Tube O'Ring
- 41. NRV 1 Kit
- 42. 6mm OD LDPE Tube ( Per Foot )
- 43. In-Mold Air Ejector (shown with 1949 control not included)
- 44. Teflon Inner Sleeve 3/8 X 1/2" For AVIS 3/8” Injection 7705
- 45. 10mm OD LDPE Tube ( Per Foot )
- 46. 1/4" Straight Connection
- 47. Teflon Vent Plug #0122
- 48. Steel -90* Elbow 3/8" NPTF Fitting
- 49. O'Ring for Solvent Pump Reservoi
- 50. NRV 3 Kit
Your cart
Authentication
